	MOTORCYCLE PARTS NEWS	NUMBER 353 PAGE 1 of 3
	YAMAHA INTERNATIONAL CORPORATION BUENA PARK, CALIFORNIA 90620 DATE 12/28/72

TX750 SPECIAL TOOL KIT, and Miscellaneous Special Tools

Please add the following information to your 1972 Special Tools Catalog:

ITEM PART NUMBER DESCRIPTION QTY. PRICE DISC. REMARKS

908-90097-50-73 KIT, TX750 SPECIAL TOOLS 1

#1* 908-90010-80-00 .PULLER, Rotor 1

#2* 908-90010-82-00 .SLIDER, Piston Ring 2 Price Each

#3* 908-90010-81-00 .BREAKER, Chain Set 1 for rivetted
chain

#4-1 908-90010-84-00 PULLER WEIGHT, Rocker Arm Shaft 1

#4-2 908-90010-83-00 PULLER, Rocker Arm Shaft 1

#4-3 908-90010-85-00 PULLER, Balancer Shaft 1

#5 908-90011-03-00 ATTACHMENT, Governor Testing 1

#6 908-90010-95-00 COMPRESSOR, Valve Spring 1

#7-1 908-90010-89-00 SOCKET, Hexagonal, 5mm 1 3/8" drive

#7-2 908-90010-90-00 SOCKET, Hexagonal, 6mm 1 3/8' drive

#7-3 908-90010-91-00 SOCKET, Hexagonal, 8mm 1 3/8" drive

#8 908-90011-05-00 TOOL, Pump Shaft Cover Installing 1

*NOTE: Items 1~3 only included in kit. ALL items 1~8 may be ordered individually.

ITEM	PART NUMBER	DESCRIPTION	QTY.	REMARKS
	908-90097-50-73	KIT, TX750 SPECIAL TOOLS	1
#1*	908-90010-80-00	.PULLER, Rotor	1
#2*	908-90010-82-00	.SLIDER, Piston Ring	2	Price Each
#3*	908-90010-81-00	.BREAKER, Chain Set	1	for rivetted chain
#4-1	908-90010-84-00	PULLER WEIGHT, Rocker Arm Shaft	1
#4-2	908-90010-83-00	PULLER, Rocker Arm Shaft	1
#4-3	908-90010-85-00	PULLER, Balancer Shaft	1
#5	908-90011-03-00	ATTACHMENT, Governor Testing	1
#6	908-90010-95-00	COMPRESSOR, Valve Spring	1
#7-1	908-90010-89-00	SOCKET, Hexagonal, 5mm	1	3/8" drive
#7-2	908-90010-90-00	SOCKET, Hexagonal, 6mm	1	3/8' drive
#7-3	908-90010-91-00	SOCKET, Hexagonal, 8mm	1	3/8" drive
#8	908-90011-05-00	TOOL, Pump Shaft Cover Installing	1
*NOTE: Items 1~3 only included in kit. ALL items 1~8 may be ordered individually.

1. ROTOR PULLER - Install the rotor puller as illustrated, and tighten with a socket wrench or a box wrench while the piston is on the compression stroke.

2. PISTON RING SLIDER - When the piston is inserted into the cylinder, set the piston slider over the piston rings. Make sure the piston ring ends are tightly forced into their grooves. Hold the piston with the piston base, and place the cylinder over the piston.
*The same piston base is usable for all XS/TX series models. (908-90010-67-00)

1. ROTOR PULLER - Install the rotor puller as illustrated, and tighten with a socket wrench or a box wrench while the piston is on the compression stroke.
2. PISTON RING SLIDER - When the piston is inserted into the cylinder, set the piston slider over the piston rings. Make sure the piston ring ends are tightly forced into their grooves. Hold the piston with the piston base, and place the cylinder over the piston. *The same piston base is usable for all XS/TX series models. (908-90010-67-00)