	MOTORCYCLE SERVICE NEWS	NUMBER 302A PAGE 1 of 1
	YAMAHA INTERNATIONAL CORPORATION BUENA PARK, CALIFORNIA 90620 DATE 12/29/72

TX750 MISCELLANEOUS SERVICE INSTRUCTIONS

This bulletin supplements M/C SNB #302
Do not destroy SNB #302.

THROTTLE WIRES. Remove coiled spring protectors from both throttle wires (Ref. 32-14, 32-15, Parts List) to prevent electrical discharge between high tension coil wires and protector springs. Remove protector as follows:

1.    Disconnect throttle wire from carburetor.

2.    Protector spring will not slide over end of throttle wire.

3.    Stretch spring out and remove as shown
            CAUTION: Do not twist throttle wire.
4.    Reassemble and check carburetor synchronization.

THROTTLE WIRES. Remove coiled spring protectors from both throttle wires (Ref. 32-14, 32-15, Parts List) to prevent electrical discharge between high tension coil wires and protector springs. Remove protector as follows:
1. Disconnect throttle wire from carburetor.
2. Protector spring will not slide over end of throttle wire.
3. Stretch spring out and remove as shown CAUTION: Do not twist throttle wire. 4. Reassemble and check carburetor synchronization.